Power Transmission Products

Product Details:

We do have a variety of V-belt pulley apart for your easy changeability of pulleys with minimum maintenance cost to your product. We do a range of taper lock pulley starting from:

Range of V-belt Pulleys available in:

• SPA, SPB, SPC, SPZ GROOVE SIZE PULLEY
• No. of Grooves 1 Groove to 5 Grooves
• Pcd of 80 mm. to 1250 mm
• Fitted with respective Taper Lock Bush

Features:

• Elasticity of belts helps shock load dampening
• Good mechanical efficiency
• Long-life expectancy when well designed
• Quiet, smooth operation; no lubrification required
• Easy and economical installation
• Clean and low maintenance

Product Details:

Tapered Split Bushings that fit into a matching tapered bore in a Sheave, Sprocket, Pin Bush Couple, Pulley etc. used to securely mount the product on to a shaft. Tapered split bushings offered by us have the following features:


How to Install-
Clean all parts of the bushing and bore of hub thus removing any oil, lacquer or dirt. Install bushing in the hub and half holes to make complete holes.

Oil thread and either the end of set screws or under the head of set screws. Install screws in loosely in holes that are threaded on hub side.

Make sure the bushing is free in the hub. Slip assembly onto the shaft and align in the desired position.

Tighten Screws until the parts have tightened.

To Remove-
Remove all Screws. Oil thread and either end of set Screws or under the head of cap screws.

Insert screws in the hole(s) that are threaded on bushing side. Note that there will be one extra screw left over.

Tighten screws alternatively until the bushing is loose in the hub. It may be necessary to tap into the hub to loosen the bushing.


Features

• No need for re-machining.
• Tapered bushing compensates for normal vibrations in shaft and component dimensional tolerances.
• Easy-On/Easy-Off installation.
• High grade, close grain iron (GG25) material
• No Costly reboring; the full range of both metric and imperial available.
• Special 4 Hole feature for balanced assemblies.
• No fretting corrosion between bore and shaft.
• Stock sizes available to handle up to 6" shaft diameter.
• Taper Lock Varieties : 1008, 1108, 1210, 1215, 1310, 1610, 1615, 2012, 2517, 2525, 3020, 3030, 3535, 4040, 4545, 5050, 6050, 7060, 8060, 10085, 120100.

Product Details:

We are manufacturer of power transmission parts like sprockets, V-pulley, couplings, nylon gear coupling etc.

We are also make british standard sprocket as per your requirements.

We make simplex, duplex, triplex sprockets of 8 teeth to 50 teeth.

Also we make sprockets as per drwaing and requirement.

Additional Information:

• Item Code: BSPTPS

Product Details:

We provide our clients a wide range of Aluminium Light Duty Sheaves, that are used to convey rotating mechanical power between two shafts in order to reduce the amount of force needed to lift a load.

These are manufactured using graded raw material, these sheaves are sturdy in construction that enables them to run the system efficiently.

Precision engineered, our range of sheaves are rustproof and have longer service life.

Product Details:

Flexible Shaft Couplings are capable of absorbing the static and dynamic misalignment which inevitably occur between two nominally in line rotating shafts. The new generation of unisoft spiders are the best subject matter of a thorough cad analysis and practical dynamic tests. Also available couplings in ready to install finished bores.

Today unisoft is a famous name in the field of mechanical power transmission couplings, and has the expertise to offer the most optimal drive line solution, either from the standard manufacturing programmer comprising of over two hundred design combinations, or by manufacturing a tailor made coupling for a specific application.

Unisoft couplings are torsionally flexible and capable of attenuating the torsional oscillations because of the damping characterstics of the spider and the drive inserts. They are fail safe and assist to restrain body resonance and contribute to noise reduction.

Product Details:

We are the manufacturer of the aluminum pulley.
We do export aluminum pulley in USA, UK, Dubai, Kuwait, Malaysia.
We supply export quality product.

Product Details:

Modern metallurgy has greatly increased the useful life of automotive gears. Automotive gears transmit torque and rotation through an angle from a power source to the driven member. Extreme pressure gear oil is a lubricant for automotive gears and bearings.

Automotive gears are machined from wrought bar stock and subsequently heat treated to develop the required surface hardness and tooth bending fatigue durability. Automotive gear ratio is the number of turns of the drive wheels in relation to the number of turns of the engine. If the engine is considered the input and the drive wheel is considered to be the output then the input gear or the pinion is said to mate with the output gear or the ring gear to drive or rotate it.

Gears play an important role in trucks, car, buses, motor bikes and even geared cycles. These gears control speed and include gears like ring and pinion, spiral gear, hypoid gear, hydraulic gears, reduction gearbox.

Depending on the size of the vehicles, the size of the gears also varies. There are low gears covering a shorter distance and are useful when speed is low. There are high gears also with larger number of teeth. These high gears cover a longer distance with one revolution of pedal. We do also have supply of Chain Sprockets as per customer's required sizes.

Product Details:

Unisoft has its unique and technically accurate products for v-belt driven pulleys for every type of machinery & plants. Your complete specification will give us more specific supply of required pulleys.
We do also produce V-belt pulleys, make to order [mot] as per sizes and special requirements of customer. V-belt pulleys are available in all groove sizes from 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 grooves, small and large bores both lightweight and heavy duty for multiple industrial applications.
Our range starting from 2", 2. 5", 3", 3. 5", 4", 4. 5", 5", 5. 50", 6", 7", 8", 9", 10", 12", 13", 14", 15", 16", 18", 20", 22", 24" material:- cast iron, aluminium, stainless steel etc.

Product Details:

We are manufacturer of power transmission product like, sprockets, V-pulley, taper lock pulley, couplings, chain sprockets etc.

We make simplex, duplex, triplex M. S. , S. S, good quality sprockets 8 teeth to 50 teeth.
Also we make british standard sprockets and special purpose sprockets.

Additional Information:

• Item Code: PTPS